6
It will also turn off 1.5 seconds after you close Squelch.
To see the display again, open Squelch.
Low Power Indication
The red LED blinks when battery power is low. Replace/recharge the
batteries or connect to a power source.
OPERATION AND MAINTENANCE
BASIC OPERATION
Turning the
radio on
Turn the
Volume
knob clockwise until it clicks and
the 7 segment LED comes on.
Turning the
radio off
Turn the
Volume
knob counter-clockwise until it
clicks and the 7 segment LED turns off.
Selecting a
channel
Press the Channel UP or DOWN button on the side
to move up or down the channel list.
Changing the
volume
Turn the
Volume
knob clockwise to increase the
volume; turn it counter-clockwise to decrease the
volume.
Transmitting
–
Tune the radio to the channel you want to
transmit on, and listen to make sure the channel
is clear.
–
Press and hold the
PTT
button.
–
Hold the microphone about 2 inches away from
your mouth and speak in a normal voice.
–
Release the
PTT
button to listen for a response.
NOTE: Make sure you have read and understood part 95 of the
FCC rules and regulations before using the transmitter.
CB COMMUNICATION CODES
The “10” code allows you to communicate easier in noisy
environments. The following table lists some of the most common
codes and their meaning.
