Uniden MYSTIC - Marine GPS Receiver, Руководство по эксплуатации

Страница: 26 / 60

24
If the called radio has been set to Standby Mode, the following
screen appears.
Group Call
1. Select an open (unused) working Channel.
2. Press
[CALL/LIGHT] .
3. At the
DSC Menu
, use
p
and
q
to select
Group Call
.
Press [ENTER] .
4. The Group MMSI code will appear.
5. Press
[ENTER] . You will see the
Attention
screen. Use
t
or
u
to
select
Yes
and press [ENTER] to make the call. Or, select
No
and
press [ENTER] to cancel the call.
6. After you press [ENTER] , the Mystic returns to the Channel
Display screen.
All Ships
1. Select an open (unused) working Channel.
2. Press
[CALL/LIGHT] .
3. At the
DSC Menu
, use
p
and
q
to select
All Ships
.
Press [ENTER] .
4. At the
All Ships Call
menu, use
p
and
q
to select
Urgency
,
Safety
,or
Routine
.
5. Press [ENTER] . You will see the
Attention
screen. Use
t
or
u
to
select
Yes
and press [ENTER] to make the call. Or, select
No
and
press [ENTER] to cancel the call.
Note:
ROUTINE
calls tune to the previously selected channel.
When sending either an
URGENCY
or
SAFETY
message, all
radios will automatically move to Channel 70 until all of the
data is received.
After selecting
URGENCY
or
SAFETY
ALL SHIPS call is
transmitted, the MYSTIC will switch to Channel 16. You
should wait a few minutes before transmitting the ALL SHIPS
call information.
Position Request
This radio has the ability to request the position of an individual vessel
that is registered in the DIRECTORY.
1. Press [CALL/LIGHT] .
Mystic OMc.book Page 24 Wednesday, August 13, 2003 5:26 PM