Uniden MHS157, Руководство пользователя

Страница: 14 / 48

Charging the Battery
Setting up the Hardware
Your radio includes a charger and a rechargeable
battery pack. Place your radio in the charger with the
display facing forward. Make sure that the CHARGE
LED on the charger turns orange.
Cautions:
• Use only the battery and charger supplied with this radio.Using a
different charger or battery can damage the radio and create a risk of
fire or shock.
• The charger is not waterproof. If the charger falls into the water,
unplug it before attempting to remove it from the water. After you
remove the charger from the water, please contact our Customer Care
Service.
• Wipe off dirt or shake water from your radio before placing in the
charger if your radio gets dirty or wet.
• Charge the battery fully before using the radio. When the battery is
completely charged, the CHARGE LED turns green.
• Don’t use the charger when the ambient temperature is below 5° C
(41° F) or above 40° C (104° F).
• If the radio is powered down, the battery can charge in about seven
hours. (If the radio is powered on, the battery takes longer to charge.)
Important notes on charging the battery
Belt Clip
To install the belt clip:
Slide the belt clip down over the latch until you hear it click.
To remove the belt clip:
1. Lift the flat latch.
2. Slide the clip up until it comes free of the latch.
The MHS157 has a jack for an optional external speaker or microphone.
1. Unscrew the cover to the speaker/microphone jack.
2. Insert the speaker/microphone plug into the jack.
Install Optional External Speaker/Microphone
14
UHF CB+VHF Marine Radio UNIDEN MHS157