E-14
Uniden MHS135 Radio Owner’s Manual
Using the radio in scan mode
x
To activate scan mode, press and hold
CLR/SCAN
.
x
You must have at least two channels in memory to start
a scan.
x
You cannot transmit while in scan mode.
x
To save a channel into memory, select the channel, then
press and hold the
GPS/MEM
button. The
MEM
icon
displays whenever you tune to that channel.
x
To remove a channel from memory, set the radio to that
channel, then press and hold the
GPS/MEM
button. The
MEM
icon no longer displays.
x
When the radio stays on a channel, press
Channel Up
to
leave that channel and resume scanning.
x
To end the scan, press and hold the
CLR/SCAN
button
again; the radio remains on the last scanned channel.
Scan mode with Weather Alert Watch
If you activate Weather Alert Watch while in scan mode, the
radio checks the most recently-used weather channel every
few seconds, then continues scanning the next channel in
memory:
11
10
08
13
12
14
17
15
The radio scans about
5 channels in 0.5 seconds.
When it detects a signal, the radio stays
on the channel until you press the
Channel Up
button or the signal stops.
Resume
scan
