1. Hold the lower part of the tray in one hand with the three battery contacts
facing down. Use your thumb to hold the notch on the lower part of the tray.
2. With your other hand, grip the upper part of the tray and lift the cover open.
3. Align the batteries’ positive and negative terminals with the drawing on the
tray and snap each battery into place.
4. Insert the two hooks on the lower part of the tray into the notches on the
cover; close the cover. (The cover fits snugly but you should not have to
force it closed.)
5. Install the alkaline battery tray in your radio just as you do the Li-Ion
Polymer battery (see page 16).
Follow these steps to use the alkaline battery tray:
WARNING!
The tray is designed to prevent the accidental
charging of alkaline batteries. Never use alkaline batteries in
the radio without the alkaline battery tray. Do not attempt to
modify the battery tray design.
NOTE
Mounting the Charger
1. Use the two holes at the base of the charger as a
template to mark the drill holes.
2. Using a 3mm (1/8-inch) drill bit, drill two holes
13mm (1/2 inch) deep.
3. Use the provided screws to attach the charger to
the surface.
You can mount the charger on any flat surface.
Setting up the Hardware
17
Handheld VHF Marine Transceiver
UNIDEN MHS127
Содержание MHS127
Страница 37: ...37 Handheld VHF Marine Transceiver UNIDEN MHS127 ...
Страница 38: ...38 Handheld VHF Marine Transceiver UNIDEN MHS127 ...
Страница 39: ...39 Handheld VHF Marine Transceiver UNIDEN MHS127 ...
Страница 40: ... 2014 Uniden Australia Pty Limited Uniden New Zealand Ltd Printed in Vietnam U01UT644CZA 0 ...