Transmitting
Transmission power can be set to either
5W or 1W.
Press the
1/5W/LOCK
button to make
the change, then the
5W
or the
1W
indicator on the display changes
accordingly.
To transmit, press and hold the
PTT
(push-to-talk) key.
TX
appears on the display.
To return to receive, release the
PTT
key.
TX
disappears from the display.
• If the
PTT
key is pressed for more than 5 minutes,
TX
starts
blinking and the transmission ends. The TX time out tone will
sound until the
PTT
key is released.
• If the battery indicator level is 0 and the
PTT
key is pressed, the
radio will not transmit and the
TX
icon and the channel number
start blinking. (Refer to the description of the Battery Indicator
on the next page.)
Lighted Keys and Display
To light the display, press any key excluding the
PTT
key.
• If you press any button other than the
PTT
key while the display
and keypad are illuminated, it remains illuminated for another
5 seconds.
Turning Off and Reactivating the Key Beep
Your radio emits a beep each time one of the buttons (except for
the
PTT
key) is pressed.
To turn off or reactivate the Key beep:
Turn the radio On again while pressing and holding the
▲
or
▼
buttons.
3
2
1
19
UT01919ZC_0 (ENG) 5/8/07 1:27 PM Page 19