Troubleshooting
If your MC535 does not perform up to expectations, try the suggestions
listed below. If you cannot get satisfactory results, call the Uniden
Customer Service Center at (800) 586-0409, 8:00 a.m. to 5:00 p.m.,
Eastern Standard Time, Monday through Friday.
Unit does not
operate
•
Make sure that the volume control is in the ON
position.
•
Check in-line power fuse. Replace if
necessary with 6 amp fast-blow fuse only.
•
Check the power cord. Be sure that the
connections are intact and 12V power is
supplied.
Weak signal
•
Check antenna connections at base of
antenna and at the back of the radio.
•
Change to another channel and check
reception again.
Unit will not transmit
•
Check to see if channel is “receive only.”
•
Check antenna connections at base of
antenna and at the back of the radio.
Excessive
background noise
•
Check and set SQUELCH control.
Channel transmits
at 1W only
•
Check if FCC restricted channel. (See page 9
for more information).
Channel display
flashes
•
Turn power off. Release the PTT switch, and
turn the radio back on.
•
Transmitter time-out activated. Release PTT
and allow radio to reset.
11
C:\MANUALS7\mc535\Mc535.vp
Tue Sep 08 10:53:53 1998
Color profile: Disabled
Composite Default screen
