background image

47

System Specifications Camera

monitor

Operating voltage 

5 V DC @ 1 Amp

Power consumption

650 mA max

Low light solution

12 IR LEDs, 1 Low light sensor

Low light sensitivity

1-8 lux

Picture sensor

OV7725 1/4’ Color CMOS

Lens

F3.6mm H:53 V:40

Lithium-Polymer Battery Warning

 

This equipment contains a rechargeable lithium-polymer battery.

 

Do not charge the battery in temperatures below 32

°

 F (0

°

 C) or higher than 113

°

 F (45

°

 C).

 

Do not open or mutilate the battery.

 

The rechargeable batteries contained in this equipment may explode if disposed of in a fire.

 

Do not short-circuit the battery.

 

Do not charge the rechargeable battery pack used in this equipment with any charger other 
than the one designed to charge this battery pack as specified in the owner’s manual. Using 
another charger may damage the battery pack or cause the battery pack to explode.

CAUTION! Rechargeable Batteries Must Be Recycled or Disposed of Properly.

recycling and Disposal Information

 

Do not dispose of electronic devices or any of their components (especially batteries and LCD displays) in 
your municipal trash collection.

 

Consult your local waste management authority or a recycling organization like 

earth911.com

 to find an 

electronics recycling facility in your area.

Содержание Lullaboo G403



















































Отзывы: