Uniden LRD2200SWS, Руководство по эксплуатации

Страница: 17 / 26

LED Signal Strength Meter in City Mode
The LED signal strength meter gives you instant information about the
strength of the signal being detected. A weak signal causes the first LED
to light, but as signal strength increases, more LEDs light. All four LEDs
light when full signal strength is received. Use this meter to judge the
distance from the signal source.
Signal Strength X-, K-, and Ka-Super
WideBand
Laser
●❍❍❍
Visual Visual/Audio
●●❍❍
Visual Visual/Audio
●●●❍
Visual/Audio Visual/Audio
●●●●
Visual/Audio Visual/Audio
Safety Warning System Operation
The Safety Warning System (SWS™) is a new communication system
that will provide an early warning when a road hazard exists. The
LRD 2200SWS is capable of detecting the SWS signal broadcast on the
K-band by either law enforcement or local departments of transportation.
The yellow SWS LED blinks and the amber K-band LED lights, while an
audible alert sounds. When this alert sounds, you should tune to local
radio traffic reports or prepare to slow down or stop your vehicle because
you could be approaching an accident, bad road conditions caused by
weather, or road crews or construction.
17