-
7
-
WARNING: TURN POWER OFF AT THE CIRCUIT BREAKER OR
FUSE BOX. DO NOT ASSUME TURNING POWER OFF AT A
WALL SWITCH WILL TURN OFF ALL POWER TO THE AREA
YOU NEED.
2. Pull wires from mounting location (ceiling/eaves, wall, etc).
3. Pull the camera wires through the gasket; press gasket flush
to mounting base.
4. Strip 3/4-inch of the wire coating from the camera wires.
Twist each camera wire with its corresponding house wire
twice (white to white, black to black). Top each connection
with wire caps.
If there is a ground wire, tuck it into junction box.
5. Tuck wiring into the junction box.
6. Align the mounting base screw holes with the screw holes in
the junction box. Verify that the gasket is evenly positioned
around the base. Using a Phillips’ head screwdriver, screw the
camera base to the junction base with the screws provided.
Do not over-tighten.
