Uniden Guardian App Cam 25, Руководство пользователя

Страница: 9 / 34

8 9
Mount the Guardian App Cam 25 Base
1. Hold the base of the camera
stand where you want to mount it
and mark the location of the
screw holes.
2. Use the included screws and
anchors to attach the base to
the wall or ceiling. You can also
screw the base into a flat surface
such as a tabletop if needed.
3. Before attaching the camera, tug gently on the stand to make sure it is
securely in place.
Attach the Guardian App Cam 25 Camera
1. For each Guardian App Cam 25,
attach the camera bracket to the
mounting screw. You can attach
the stand to the top or the bottom
of the camera as needed.
Tighten it a few turns, then turn
the camera to face the direction
you want.
2. Tighten the camera brace up
against the Guardian App Cam
25 to secure it into place.
3. Unlock the mounting post by
turning the wingnut to the left a few turns.
4. Set the mounting post to the correct angle, then tighten the wingnut until
the post is locked into place.
5. After the Guardian App Cam 25 camera is installed, reconnect power.