Uniden GPS9000NZ, Руководство пользователя

Страница: 20 / 28

18
Trap and False Database Delete
Select “Database” and press . In this mode, you
can delete the data for False Alerts and Trap Locations
programmed in the GPS module.
Select “False” or “Trap” with or , and press
if you want to delete the data. The display will
show “Delete?”. After pressing the display will
show “Cleaning”, then “Deleted” to confirm that the database
has been cleared.
As to the False Area and Trap Point, refer to pages 21 and 22
for details.
Note:
•“Cleaning” indication may last for a while until all
stored data is cleared. After all stored data is cleared,
the display indicates “Deleted” and confirmation tone
sounds.
• The unit will immediately begin collecting data again
after cleaning the database.
Warning Feature
When the GPS9000NZ detects a radar, laser or safety warning
signal, it emits a distinct warning tone respectively. The detect-
ed band name appears on the display as X, K, Ka, SW, VG, L,
L2 or L3 along with its signal strength and speed indication.
When the signal gets stronger , more signal strength portions
light up the signal strength meter . You can use this meter to
judge the distance from the signal source as it gives you instant
information about the signal being detected.
SELECT/TRAP
SELECT/TRAP
SELECT/TRAP
GREEN
Signal LV 1
g
Signal LV 3
GREEN
GPS Qk newfont 2/13/02 4:05 PM Page 20