39
Motion
Set parameters on each channel for detecting motion.Use the Copy To feature
to transfer the settings to other channels.
Motion Detection setting screen
•
Channel - select relevant channel to change its motion parameter.
•
Enable Motion Detection - Choose to enable motion detection.
•
Area Setting - Set the area whereby the motion is to be detected.
- It consists of area within enclosed red boxes. Use the mouse
to set up area.
- Left click and hold while you drag to set up the detect area.
- Right click and hold while you drag to remove the detect
area.
•
Sensitivity: Set the sensitivity level for the motion detection.
•
Alarm Schedule: Set up the alarm schedule.
•
Linkage - Set up the alarms that need to be triggered when motion has
been detected. Choose from audio warning, alarm on monitor, email,
upload to center, alarm out and recording.