Uniden GNVR 167 Series, Руководство пользователя

Страница: 77 / 163

77
Start address/end address : Select one type from the dropdown list, you can
input IP address in the start address and end address. Now you can click Add
IP address or Add IP section to add.
a)For the newly added IP address, it is in enable status by default. Remove
the √ before the item, and then current item is not in the list.
b)System max supports 64 items.
c)Address column supports IPv4 or IPv6 format. If it is IPv6 address, system
can optimize it. For example, system can optimize aa:0000: 00: 00aa: 00aa:
00aa: 00aa: 00aa as aa:: aa: aa: aa: aa: aa: aa.
d)System automatically removes space if there is any space before or after
the newly added IP address.
e)System only checks start address if you add IP address. System check start
address and end address if you add IP section and the end address shall be
larger than the start address.
f)System may check newly added IP address exists or not. System does not
add if input IP address does not exist.
Delete : Click it to remove specified item.
Edit : Click it to edit start address and end address.
System can check the IP address validity after the edit operation and
implement IPv6 optimization.
Default : Click it to restore default setup. In this case, the trusted sites and
blocked sites are both null .
Note: If you enabled trusted sites, only the IP in the trusted sites list can access the device.
If you enabled blocked sites, the IP in the blocked sites can not access the device. System
supports add MAC address.