To adjust the sound, press
MENU/
. Advance
through the menu until
TONE
appears, then press
ENTER/
. The current setting flashes.
To turn off the beep:
Press
CH
to display
oF
, then press
ENTER/
.
To turn on the beep:
Press
CH
to display
on
, then press
ENTER/
.
Key Lock
Press and hold the
ENTER/
until
LOCK
appears.
To turn Keylock off, press and hold
ENTER/
again.
Note:
•
If Keylock is on, the radio can still receive
transmissions. Use
D CALL
in Standard mode,
VO
or
,
PTT
,
BOOST,
LIGHT/MON
, and
MENU/
to turn the radio on or off.
•
The radio retains the keylock status even when you
cycle power.
Using the Flashlight
You can use this radio in an emergency. If you
press
LIGHT/MON
, the radio turns on the high-
intensity LED flashlight on your radio. Depending
on how you set it up, the LED functions as a
flashlight, flashes “S O S” in international Morse
Code, is always on, or is off.
Note:
Your radio operates normally when the
SOS strobe is activated.
1. Press
LIGHT/MON
while this light is turned off,
the Strobe Light emits the SOS signal. (Strobe
SOS mode)
2. And then, press
LIGHT/MON
once more, it will
turn on continuously. (Always On mode)
3. And then, press
LIGHT/MON
while Always On
mode, the light will be turned off.
Automatic Power Save Feature
Your radio has a unique circuit designed to
dramatically extend the life of the battery. If you do
not transmit and do not receive an incoming call
within 3 seconds, your radio switches to the Power
Save mode. The radio is still able to receive
transmissions in this mode.
LCD Backlight
The LCD Backlight automatically turns on when any
key (except for
PTT
and
BOOST
) is pressed. The
LCD remains lit for 10 seconds before turning off.
USING THE WEATHER RADIO
Your radio can receive weather broadcasts from the
NOAA National Weather Service. When in Weather
Radio Alert mode, the system functions as it does
in Standard mode or Group mode but also monitors
the selected weather channel for alerts when not
communicating. While using the Weather Radio,
you are not able to receive GMRS communications.
1. To turn on the Weather Radio Broadcast mode,
press
WX/ALERT
.
WX
appears.
2. Press
CH
or to increase or decrease the
number to the desired Weather Channel.
3. To exit the Weather Radio Broadcast mode, press
WX/ALERT
.
WX
disappears.
When in the Weather Radio Broadcast mode, you
can only set the Beep Tone from the Menu mode.
Choosing an Emergency/Weather Channel
There are 7 NOAA channel frequencies available
and these frequencies are common between the US
and Canada. You need to know what frequency is
being transmitted in your location.
1. Press and hold
WX/ALERT
.
appears.
2. When the unit receives a warning signal, it beeps
for 5 seconds.
and channel indicator flash.
3. To turn off Weather Alert, press and hold
WX/ALERT
.
disappears.
• When Weather Alert is activated, the highest priority
is given to this function. It checks the weather alert
signals every 7 seconds. When the unit finds a
warning signal, it switches to the Warning Receive
mode automatically.
• Weather Alert is activated even if Beep Tone is off.
NOAA Weather Radio Frequency List:
Chan.
Freq.
(MHz)
Chan.
Freq.
(MHz)
1
162.550
5
162.450
2
162.400
6
162.500
3
162.475
7
162.525
4
162.425
SPECIFICATIONS
Item
Specification
Channels
15 GMRS/7 FRS/7 Weather
Privacy
Codes
38 Sub-Audible Tones
104 DCS Codes
Operating Frequency (MHz)
GMRS/FRS:
462.5500 - 467.7125
WX:
162.4000 - 162.5500
Power
Source
NiMH Batteries (#BP-38)
Range
(Chan.)
Miles
1-7
Up to 18 (up to 50 with
BOOST
)
8-14
Up to 5
Item
Specification
15-22
Up to 18 (up to 50 with
BOOST
)
Battery Life
(Hours)
10 Hours (typical) -- NiMH
Batteries (5/5/90 duty cycle)
FREQUENCIES
Frequency Chart
CH.
Freq.
Cross-Ref.
CH.
Freq.
Cross-
Ref.
1
462.5625
FRS & GMRS 1
12
467.6625
FRS 12
2
462.5875
FRS & GMRS 2
13
467.6875
FRS 13
3
462.6125
FRS & GMRS 3
14
467.7125
FRS 14
4
462.6375
FRS & GMRS 4
15
462.5500
GMRS 11
5
462.6625
FRS & GMRS 5
16
462.5750
GMRS 8
6
462.6875
FRS & GMRS 6
17
462.6000
GMRS 12
7
462.7125
FRS & GMRS 7
18
462.6250
GMRS 9
8
467.5625
FRS 8
19
462.6500
GMRS 13
9
467.5875
FRS 9
20
462.6750
GMRS 10
10
467.6125
FRS 10
21
462.7000
GMRS 14
11
467.6375
FRS 11
22
462.7250
GMRS15
CTCSS & DCS CODES
CTCSS Chart (Hz)
Code
Freq.
Code
Freq.
Code
Freq.
oF
OFF
13
103.5
26
162.2
1
67.0
14
107.2
27
167.9
2
71.9
15
110.9
28
173.8
3
74.4
16
114.8
29
179.9
4
77.0
17
118.8
30
186.2
5
79.7
18
123.0
31
192.8
6
82.5
19
127.3
32
203.5
7
85.48
20
131.8
33
210.7
8
88.5
21
136.5
34
218.1
9
91.5
22
141.3
35
225.7
10
94.8
23
146.2
36
233.6
11
97.4
24
151.4
37
241.8
12
100.0
25
156.7
38
250.3
DSC Code List
Tone
No.
Octal
Code
Tone
No.
Octal
Code
Tone
No.
Octal
Code
39
023
67
174
95
445
40
025
68
205
96
464
41
026
69
223
97
465
42
031
70
226
98
466
43
032
71
243
99
503
44
043
72
244
100
506
45
047
73
245
101
516
46
051
74
251
102
532
47
054
75
261
103
546
48
065
76
263
104
565
49
071
77
265
105
606
50
072
78
271
106
612
51
073
79
306
107
624
52
074
80
311
108
627
53
114
81
315
109
631
54
115
82
331
110
632
55
116
83
343
111
654
56
125
84
346
112
662
57
131
85
351
113
664
58
132
86
364
114
703
59
134
87
365
115
712
60
143
88
371
116
723
61
152
89
411
117
731
62
155
90
412
118
732
63
156
91
413
119
734
64
162
92
423
120
743
65
165
93
431
121
754
66
172
94
432
RBRC Information
As part of our commitment to
protect the environment and
conserve natural resources,
Uniden voluntarily participates
in an RBRC
®
industry program
to collect and recycle used Ni-MH batteries
within the US. Please call 1-800-8-BATTERY for
information on Ni-MH battery recycling in your
area. (RBRC
®
is a registered trademark of the
Rechargeable Battery Recycling Corporation.)
Your radio might cause TV or radio interference
even when it is operating properly. To determine
whether your radio is causing the interference,
turn it off. If the interference goes away, your radio
is causing it.
Try to eliminate the interference by moving your
radio away from the receiver. If you cannot
eliminate the interference, the FCC requires that
you stop using the radio.
Hazardous Environments:
Do not operate the
radio in hazardous environments. Explosion or fire
may result. Do not operate the radio near
unshielded electrical blasting caps.
Under certain conditions, radios can interfere with
blasting operations and may cause an explosion.
Turn your radio OFF to prevent accidental
transmission when in a blasting area or in areas
posted: "Turn off two-way radio." Construction
crews often use remote control RF devices to set
off explosives.
Care and Safety:
To clean the radio, use a soft
cloth dampened with water. Do not use cleaners or
solvents because they can harm the body of the
unit and leak inside, causing permanent damage.
Use a dry, lint-free cloth to clean the battery
contacts.
COMPLIANCE INFORMATION
FCC Compliance Statement: This device complies
with Part 15 of the FCC rules. Operation is
subjected to the following two conditions: (1) this
device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
This device complies with Industry Canada license-
exempt RSS standard(s).Operation is subject to the
following two conditions: (1) this device may not
cause interference, and (2) this device must accept
any interference, including interference that may
cause undesired operation of the device.
Changes or modifications not expressly approved
by the party responsible for compliance could void
your authority to operate the equipment.
Avis de conformité à la FCC : Ce dispositif a été
testé et s’avère conforme à l’article 15 des
règlements de la Commission fédérale des
communications (FCC). Ce dispositif est soumis
aux conditions suivantes: 1) Ce dispositif ne doit
pas causer d’interférences nuisibles et; 2) Il doit
pouvoir supporter les parasites qu’il reçoit, incluant
les parasites pouvant nuire à son fonctionnement.
Cet appareil est conforme aux normes RSS
exemptes de licences d’Industrie Canada. Son
fonctionnement est soumis aux deux conditions
suivantes : (1) cet appareil ne doit pas causer
d’interférences nuisibles et (2), il doit pouvoir
accepter les interférences, incluant celles pouvant
nuire à son fonctionnement normal.
Tout changement ou modification non approuvé
expressément par la partie responsable pourrait
annuler le droit à l’utilisateur de faire fonctionner cet
équipement.
RF EXPOSURE INFORMATION
WARNING!
Read this information before using the
radio. In August 1996 the Federal Communications
Commission (FCC) of the United States with its
action in Report and Order FCC 96-326 adopted an
updated safety standard for human exposure to
radio frequency electromagnetic energy emitted by
FCC regulated transmitters.
Those guidelines are consistent with the safety
standard previously set by both U.S. and
international standards bodies. The design of the
radio complies with the FCC guidelines and these
international standards.
Never allow children to operate the radio without
adult supervision and the knowledge of the following
guidelines.
WARNING!
It is up to the user to properly operate
this radio transmitter to ensure safe operation.
Please adhere to the following:
Use only the supplied or an approved antenna.
Unauthorized antennas, modifications, or
attachments could impair call quality, damage the
radio, or result in violation of FCC regulations.
Do not use the radio with a damaged antenna. If a
damaged antenna comes into contact with the skin,
a minor burn may result. Please contact your local
dealer for a replacement antenna.
Hand-held Operation (Held-to-Face)
This device was evaluated for typical hand-held
(held-to-face) operations with a 1 inch spacing from
the front of the radio. For hand-held operation, the
radio should be held 1 inch from the user's face
inorder to comply with FCC RF exposure
requirements.
For more information about RF exposure, please
visit the FCC web site at www.fcc.gov.
Body-Worn Operation
This device was tested for typical body-worn
operations using the supplied belt-clip. To
maintain compliance with FCC RF exposure
requirements, Body-worn operations are
restricted to the supplied belt-clip. For hand-
held operation, the radio should be held 1
inch from the user's face. The use of
accessories that do not satisfy these
requirements may not comply with FCC RF
exposure requirements and should be
avoided. For more information about RF
exposure, please visit the FCC web site at:
www.fcc.gov.
For body worn operation, this device has
been tested and meets the Industry Canada
OF ANY NATURE WHATSOEVER, WHETHER
EXPRESS, IMPLIED OR ARISING BY OPERATION
OF LAW, INCLUDING, BUT NOT LIMITED TO ANY
IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE.THIS
WARRANTY DOES NOT COVER OR PROVIDE
FOR THE REIMBURSEMENT OVERPAYMENT OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Some states do not allow this exclusion or limitation
of incidental or consequential damages so the above
limitation or exclusion may not apply to you.
LEGAL REMEDIES: This warranty gives you specific
legal rights, and you may also have other rights
which vary from state to state. This warranty . is void
outside the United States of America and Canada.
PROCEDURE FOR OBTAINING PERFORMANCE
OF WARRANTY: If, after following the instructions in
the owner’s manual you are certain that the Product
is defective, pack the Product carefully (preferably in
its original packaging). Disconnect the battery from
the Product and separately secure the battery in its
own separate packaging within the shipping carton.
The Product should include all parts and accessories
originally packaged with the Product. Include
evidence of original purchase and a note describing
the defect that has caused you to return it.The
Product should be shipped freight prepaid, by
traceable means, to warrantor at:
Uniden America Service
C/O Saddle Creek
743 Henrietta Creek Road, Suite 100
Roanoke, TX 76262
RF exposure guidelines when used with
Uniden accessories supplied or designated
for this product. Use of other accessories
may not ensure compliance with Industry
Canada RF exposure guidelines.
Fonctionnement de l’appareil, lorsque porté
sur le corps. Cet appareil a été testé et s’est
avéré conforme aux normes d’Industrie
Canada et approuvé pour le port sur le corps
à l’aide des accessoires Uniden inclus et
conçus pour cet appareil. L’utilisation
d'accessoires ne respectant pas les
exigences d'exposition RF d’Industrie
Canada doit être évitée.
ONE YEAR LIMITED
WARRANTY
Important:
Save your receipt!
Evidence of
original purchase is required for warranty service.
WARRANTOR: UNIDEN AMERICA
CORPORATION ("Uniden")
ELEMENTS OF WARRANTY: Uniden warrants, for
one year, to the original retail owner, this Uniden
Product to be free from defects in materials and
craftsmanship with only the limitations or exclusions
set out below.
WARRANTY DURATION: This warranty to the
original user shall terminate and be of no further
effect 12 months after the date of original retail
sale. The warranty is invalid if the Product is:
(A) damaged or not maintained as reasonable or
necessary, (B) modified, altered, or used as part of
any conversion kits, sub-assemblies, or any
configurations not sold by Uniden, (C) improperly
installed, (D) serviced or repaired by someone
other than an authorized Uniden service center for
a defect or malfunction covered by this warranty,
(E) used in any conjunction with equipment or parts
or as part of any system not manufactured by
Uniden, or (F) installed or programmed by anyone
other than as detailed by the owner’s manual for
this product.
STATEMENT OF REMEDY: In the event that the
product does not conform to this warranty at any
time while this warranty is in effect, warrantor will
either, at its option, repair or replace the defective
unit and return it to you without charge for parts,
service, or any other cost (except shipping and
handling) incurred by warrantor or its
representatives in connection with the performance
of this warranty. Warrantor, at its option, may
replace the unit with a new or refurbished unit.
THE LIMITED WARRANTY SET FORTH ABOVE IS
THE SOLE AND ENTIRE WARRANTY
PERTAINING TO THE PRODUCT AND IS IN LIEU
OF AND EXCLUDES ALL OTHER WARRANTIES
© 2015 Uniden America Corp.
Issue 1, December 2015
All rights reserved
Printed in China
