41
FIelD
DescrIptIon
Enable
enable this function on a channel to detect motion.
Holding Time
Set an alarm delay time for the channel. Options are 5
sec., 10 sec., 20 sec., 30 sec., 60 sec., and 120 sec., or
“Always.”
Trigger
Select this field to set alarm trigger configuration, trigger
recording, PTZ camera linking (PTZ camera not included),
etc. Selecting this field displays the
Trigger
screen for a
specific channel.
area
Commonly called “motion masking,” a grid overlays a
selected camera’s live video with task bar at the bottom.
mask off areas the motion detection ignores. you can also
determine motion sensitivity (block off ceiling fans, or the
floor area if you have pets.)
In this interface, the user can drag the scrollbar to adjust
the sensitivity value (1-8). The default value is 6; the
smaller the value is, the higher the sensitivity. Since the
sensitivity is affected by the color, time (day or night), etc,
adjust the value according to the actual situation.
