2
To install the batteries (not supplied), open the casing (found at the base)
and then insert three AA batteries with proper orientation.
1. Use the included guide card to mark the place to install and screw the
camera.
2. Drill necessary holes in the marked spots.
3. Place the included anchors into the drilled spots.
4. Use the anchors to hold the screws, and ensure that the screws stay out a
bit to hold the camera.
Place the camera on the selected spot
to match the mounting holes with
the screws and turn it to the right
to fix it.
SPECIFICATIONS
INSTALLATION
Material
ABS
Colour
White
Camera Base
ABS
Camera Lens
Plastic
Power Source
3 x 1.5V AA batteries
On/Off Method
Installation/Removal of batteries
Accessories
Mounting Hardware, 2 Screws
Unit N.W
130g