For 'Call Waiting' to
operate you must
subscribe to this service
through your local
telephone company.
If you do not have this
service, then pressing
the flash button during a
call may disconnect the
caller.
FLASH
FLASH
Ringer Hi/Low
Regular dialling
Redial function
Last 10 number redial
Pause function
Mute button
Handset Volume
Flash button - Call Waiting
Set the Ringer Switch to the desired level
for HI and
for LOW. The Switch is located
underneath the unit.
Lift the handset and listen for dial tone. Then enter the telephone number you wish to call. The
dialled number will appear on the display screen whenever you make a call.
To redial the previous number you called. Lift the handset or press
and press
.
1. With the handset on the cradle press
.
2. Press
or
to review the last 10 numbers dialled.
3. Pick up the handset or press
to dial the selected number.
To insert a temporary pause. Press the
/pause button during a dialling sequence. For
example, in some cases when dialling an international number you need to place a pause between
the clusters of numbers to allow the telephone company, relaying the call, time to process it. The
number 011-886-22-795-1234 would need to be dialled 011
/pause 886,
/pause
22,
/pause795,
/pause 12345.
For privacy when you are required to consult with a person standing next to you and do not wish
the party on the line to hear your conversation, press
. Press
again to resume the
conversation.
During the call press
or
to adjust the volume.
New Zealand:
Australia:
If the Call Waiting tone sounds while you are on a call -
Press the
button to switch between callers.
Press
then
to switch between callers.
To switch your call to speaker phone, press
and hang up the handset. To switch
back, simply pick up the handset and speak. You can make, receive and dial in the
speaker mode.
During the conversation, you can press
or
to adjust the speaker volume.
Speaker Button
Speaker Volume
REDIAL
REDIAL
REDIAL
REDIAL
REDIAL
MUTE
MUTE
REDIAL
REDIAL
TELEPHONE KEY FUNCTIONS
