SELECT STEP FREQUENCY
You can change the steps of VHF-Low, FM, Aircraft, VHF-High
and UHF bank.
1. Press
(Srvc)
until a bank you want to change appears.
2. Press
(Stp)
until a step mode appears.
3. Use
the
/ to select steps from Auto / 5.0 / 6.25 / 10.0 /
12.5 kHz ( The Step for Aircraft bank is 8.33 or 12.5 kHz.)
4. Press
(Clr)
or
(Stp)
or wait for 2 seconds to return to the
mode you were in.
LOCKOUT PREPROGRAM FREQUENCY
You can skip up to 40 specifi ed frequencies during a Service scan.
This lets you avoid unwanted frequencies in Service Scan Mode.
To skip a frequency:
1. Press
(L/O)
when the scanner stops on the frequency in
Service Scan Mode or when you have selected frequency
manually in Service scan hold mode.
L/O
appears.
To cancel skip for a single frequency:
1.
Manually select the frequency, then
(L/O)
.
L/O
disappears.
To cancel all skip frequencies:
1.
Press
(Hold)
to stop scanning in Service scan hold mode,
then press & hold
(L/O)
. A confi rmation tone sounds.
LOCKOUT FAVOURITE CHANNEL
you can increase the scanning speed by locking out channels
that have a continuous transmission for all the channels in
favourite channel memory.
To lock out a channel:
1.
Manually select the channel, then press
(L/O)
.
L/O
appears.
Note:
You can still manually select locked-out channels.
To remove the lockout from a channel:
1.
Manually select the channel, then press
(L/O)
.
L/O
disappears.
OPERATION
20
UNIDEN EZI33XLT
Scanner
UB366AV_EZI33XLT_0119.indd 20
UB366AV_EZI33XLT_0119.indd 20
2012/01/19 20:58:20
2012/01/19 20:58:20
