SETTING YOUR OUTGOING MESSAGE (OGM)
When you receive a call, the answering system automatically
plays a preset message or your own personal outgoing message.
▼
Preset messages
The following message is prerecorded at the factory:
“Hello, no one is available to take your call. Please leave
a message after the tone”.
To record your own OGM, follow the steps below.
▼
Recording your personal OGM
1) Press and hold
ogm
until
you hear a long tone. Release
ogm
and record your message.
2) When you are finished
recording your message, press
ogm
again. A tone sounds and
your message plays back on
the base speaker.
22
You can record an OGM of
up to 30-seconds.
Stand approximately
12 inches in front of the
microphone and speak
clearly when recording
your outgoing message.
To choose between the prerecorded outgoing message and
your personal outgoing message, press
ogm
during outgoing
message playback. This switches between the two options.
C:\Exv990\exv990 part 2 of 2.vp
Wed Sep 09 08:57:58 1998
Color profile: Disabled
Composite Default screen
