11
3
The number is dialed. After
about 5 seconds, the call-time
display appears.
4
To hang up, press
or
place the handset on the base.
The call-time will be displayed
for about 5 seconds.
Dialing from standby
1
Enter the phone number. (Up to 32
digits.)
Example
: Enter 8178583300
2
Press .
“
Talk
” flashes on the
display.
Then the volume setting appears for a
few seconds.
For example, if the volume is set to
high, the display shows:
During the operation you
must press a key within 20
seconds or the phone will
return to standby.
BASICS
Press if
you enter a wrong number
at step 1.
Making a call
With the handset
Other Operations
To
Do this
To adjust the earpiece volume
Press
or
during the call.
To temporarily switch to tone dial
Press
. The following
(When the base is set to pulse
numbers dialed will be sent as
mode)
tone dialing.
To enter a pause in the dialing
Press
.
sequence
To improve reception
Press
.
“
Scanning
” appears on the
display while changing a channel.
EXT1865 7/25/00 16:31 Page 11
