Uniden EXT 176 SERIES guide, Краткое руководство пользователя

Страница: 5 / 52

Q U I C K R E F E R E N C E G U I D E [ 3 ]
Step 1 Charging the Battery
TO INSTALL THE HANDSET BATTERY CONNECT TO A PHONE LINE
When the handset battery pack is fully charged,
after 15-20 hours of charging, plug the telephone
cord into the base unit and then into a telephone
wall jack.
Your phone is set for tone dialing. If your local
network requires pulse dialing, please see
“Choosing the dialing mode” on page 15.
1
Remove the cover.
TO CHANGE CALLER ID OPTIONS
1
Press and hold cid/menu .
2
Press or to move the pointer to
an option.
3
Press select to change the option setting.
4
Press end and return the handset to
the base.
TO CHOOSE THE LANGUAGE
1
Press and hold cid/menu .
2
Press or to move the pointer to
Language
.
3
Press select to select Eng (English) or
Fr.
(French).
4
Press end and return the handset to
the base.
1
Plug AC adapter cord into the base unit
and then into a 120V AC outlet.
(Use only
the supplied AD-310 AC adapter.)
2
Place the handset in the base.
2
Connect the battery pack
connector with the
correct polarity.
3
Replace the cover.
TO PLUG INTO AC POWER
Note: You must charge the battery continuously for
15 - 20 hours before using the phone.
Note: Three Caller ID options are available: AutoTalk,
Caller ID on Call Waiting (CIDCW), and Area Code.
QUICK REFERENCE GUIDE
Step 2 Connecting Step 3 Setting Up the Caller ID/Language
EXT176 7/30/2 11:10 AM Page 3