Uniden EXT 1465 Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 64

background image

T R O U B L E S H O O T I N G

[ 55 ]

TROUBLESHOO

TING

Troubleshooting

If your phone is not performing to your expectations, please try these simple steps first.

Symptom

Suggestion

The

status

LED won’t illuminate when • Make sure the AC adapter is plugged into the base and wall outlet.

the handset is placed in the base.

• Make sure the handset is properly seated in the base.
• Make sure the charging contacts on the handset and base are clean.

The audio sounds weak

• Move the handset and/or base to a different location away from metal objects

and/or scratchy.

or appliances and try again.

• Press

select/chan

to help eliminate background noise.

• Make sure that you are not too far from the base.

Can’t make or receive calls.

• Check both ends of the base telephone line cord.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Disconnect the AC adapter for a few minutes, then reconnect it.
• Change the digital security code (See page 51).
• Make sure that you are not too far from the base.

The handset doesn’t ring or receive

• The battery pack may be weak. Charge the battery in the base unit

a page.

for 15-20 hours.

• The handset may be too far away from the base unit.
• Place the base unit away from appliances or metal objects.
• Change the digital security code (See page 51).

Severe noise interference.

• Keep the handset away from microwave ovens, computers, remote control toys,

wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights,
and electrical appliances.

• Move to another location or turn off the source of interference.

The Caller ID does not display.

• The handset was picked up before the second ring.
• The call was placed through a switchboard.
• Call your local telephone company to verify your Caller ID service is current.

The handset doesn’t communicate

• Change the digital security code (See page 51).

with the base or the other handset.

• Make sure that you registered the second handset.

The second handset can’t join

• Only one handset at a time can talk with an outside caller. To allow a different

the conversation.

handset to talk to the caller, transfer the call to the other handset.

If you still have a problem.

• Call our customer hotline at 1-800-297-1023.

EXT1465 (ENG)-06/04 6/4/02 9:57 AM Page 55

«
...
55
56
57
58
59
...
»

Содержание EXT 1465

































































Отзывы:

Нет отзывов

Похожие инструкции для EXT 1465

Бренд: D-Link Страницы: 2

Бренд: Uniden Страницы: 8

Бренд: Jacob Jensen Страницы: 16

Бренд: Wacker Neuson Страницы: 44

Бренд: Jabra Страницы: 8

Touch Screen Caller ID Phone

Бренд: ENZER Страницы: 5

Бренд: Topcom Страницы: 80

Бренд: KAPSCH Страницы: 78

Бренд: CHARITY MOBILE Страницы: 14

Бренд: GE Страницы: 1

Бренд: GE Страницы: 4

BedroomPhone 00023810

Бренд: GE Страницы: 2

BedroomPhone 16224640

Бренд: GE Страницы: 2

Бренд: GE Страницы: 2

BedroomPhone 00004548

Бренд: GE Страницы: 2

Бренд: GE Страницы: 4

Бренд: GE Страницы: 2

Бренд: GE Страницы: 17

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды