Uniden EXS 9966 Скачать руководство пользователя

Страница: 45 / 48

If your phone is not performing to your expectations, please try these

simple steps before calling Uniden customer service at

(800) 297-1023.

QUICK REFERENCE CHART

OUBLESHOOTIN

YOUR NEW PHONE

The

status

LED

won’t come on when

the handset is placed

in the base.

Make sure the AC adapter is plugged into the base

and wall outlet.

Make sure the handset is properly seated in the base.

Make sure the charging contacts on the handset

and base are clean.

PROBLEM

The audio sounds

weak and/or scratchy.

Make sure that the base antenna is in a vertical

position.

Move the handset and/or base to a different location

away from metal objects or appliances and try again.

Can’t make or

receive calls.

Check both ends of the base telephone line cord.

Make sure the AC adapter is plugged into the base

and wall outlet.

Disconnect the AC adapter for a few minutes, then

reconnect it.

Place the handset back on the charging cradle for a

few seconds. The

status

LED blinks indicating

that the phone has been reset.

The handset doesn’t

ring or receive a page.

The Caller ID does not

display.

The Nickel-Cadmium battery pack may be weak.

Charge the battery on the base for 15-20 hours.

Be sure the antenna is in a vertical position.

The handset may be too far away from the base.

Place the base away from appliances or metal objects.

Place the handset back on the charging cradle for a

few seconds. The

status

LED blinks indicating

that the phone has been reset.

Make sure that the ringer switch is on.

The handset was picked up before the second ring.

The call was placed through a switch board.

Call your local telephone company to verify your

Caller ID service is current.

SUGGESTION

Содержание EXS 9966

















































Результаты поиска

Содержание EXS 9966

Отзывы:

Похожие инструкции для EXS 9966

Бренды по названию

Популярные бренды

Uniden EXS 9966, Руководство пользователя

Результаты поиска

Содержание EXS 9966

Отзывы:

Похожие инструкции для EXS 9966

Бренды по названию

Популярные бренды