Uniden EXS 2060 Скачать руководство пользователя

Страница: 40 / 44

Symptom

The

power

LED does

not light.

The

status

LED won't

come on when the
handset is placed in
the base unit.

The audio sounds
weak and/or scratchy.

Can't make or receive
calls.

The handset doesn't
ring or receive a page.

The Caller ID does not
display.

Suggestion

• Make sure the AC adapter is plugged

into the base unit and wall outlet.

• Make sure the handset is properly

seated in the base unit.

• Make sure the charging contacts on

the handset and base unit are clean.

• Make sure that the base unit antenna

is in a vertical position.

• Move the handset and or base unit

to a different location away from
metal objects or appliances and try
again.

• Make sure that you are not too far

from the base.

• Check both ends of the base unit

telephone line cord.

• Make sure the AC adapter is plugged

into the base unit and wall outlet.

• Disconnect the AC adapter for a few

minutes, then reconnect it.

• Reset the digital security code

(See page 35).

• Make sure is pressed.

• The battery pack may be weak.

Charge the battery on the base unit
for 15-20 hours.

• The handset may be too far away

from the base unit.

• Place the base unit away from

appliances or metal objects.

• Reset the digital security code

(See page 35).

• Make sure the ringer switch is set on

(See page 15).

• The handset was picked up before

the second ring.

• The call was placed through a switch

board.

• Call your local telephone company

to verify your Caller ID service is
current.

TROUBLESHOOTING

YOUR NEW PHONE

If your phone is not performing to your expectations, please try
these simple steps first.

Содержание EXS 2060













































Результаты поиска

Содержание EXS 2060

Отзывы:

Похожие инструкции для EXS 2060

Бренды по названию

Популярные бренды

Uniden EXS 2060, Руководство пользователя

Результаты поиска

Содержание EXS 2060

Отзывы:

Похожие инструкции для EXS 2060

Бренды по названию

Популярные бренды