Uniden EXP92, Инструкция по эксплуатации

Страница: 18 / 30

Storing a Mixed Tone/Pulse Numbers
If your phone is set up for Pulse Dialing, you can store a mixed
mode number (up to 16 digits) to easily access long distance
services.
1. Remove the Handset from the Base Unit and press
M
.
2. The talk LED flashes and you will hear a beep.
3. Enter the number to be dialed in pulse mode.
Note:
You have 20 seconds after pressing
M
to enter the
number you wish to store. Otherwise, an error tone will
sound.
4. Press the
O
button on the Handset. The
O
button counts as
one digit.
5. Enter the number to be dialed in tone mode.
6. Press
M
and a number (0-9) for the memory location you wish
to use.
Note: If you select any key other than 0-9, the Handset will beep
rapidly and no number will be stored.
7. You hear a long beep and the talk LED goes out.
8. Write the stored number and its memory location number on
one of the enclosed stickers.
Dialing a Stored Number
To dial a number stored in memory, press
T
, then press
M
and the memory location (0-9). Your EXP92 will dial the stored
number.
Note: If you select a memory location that does not have a stored
number, the Handset will beep rapidly and will not dial.
Chain Dialing
On certain occasions, after dialing a number, you may be
requested to enter a special access code, such as when
performing a banking transaction.
1. Store the access code into one of the memory locations (0-9).
2. Dial the main number.
3. Press
M
and the memory location of the access code at the
appropriate time.
18