Setting Up Your Phone
Extending the Antenna
Before using your phone, be sure to raise its antenna to the
vertical position.
Installing the Battery Pack
1. Remove
the handset
battery cover.
2. Plug the battery’s cable
into the handset.
3. Replace the battery cover.
▼
Charging the handset
Place the handset on the
base to charge.
▼
Low Battery Indicator
When the Battery Pack in the handset
is low and needs to be charged, the
batt low led flashes every 3 seconds.
If this occurs while you are on the
phone, you hear an alert tone.
Complete your call as quickly as
possible, and return the handset to
the base for charging.
▼
Cleaning the Battery Contacts
To maintain a good
charge, it is important
to clean all battery
contacts on the handset
and base about once a
month. Use a pencil eraser
or other contact cleaner.
Do not use any liquids
or solvents.
Adjusting Ringer/Volume Controls
▼
Ringer Tone and Volume
1. While the phone is not in use, press
G
.
2. The phone has two ringer tones, each with two volume
levels. Press
G
again until you select the ringer tone and
volume you want.
▼
Setting the Receiver Volume
1. While you are on a call, press
V
.
2. The phone has two receiver volume levels, one soft and
one loud. Press
V
again until you select the receiver
volume you want.
7
NOTE
The memory backup feature allows up to 3
minutes after disconnecting the old battery
pack to install a new one without losing any
phone numbers stored in memory.
NOTE
The plastic
connectors will fit
together only one
way. Make sure the
battery’s connector is
properly aligned.
C:...exp91_92_93.vp
Wed Jun 24 14:32:00 1998
Color profile: Disabled
Composite Default screen
