Erasing a Stored Number
1. Remove the Handset from the Base Unit.
2. Press
M
twice.
3. Press the memory location number (0-9) you want to clear. You
will hear a long beep confirming that you have erased the
number.
Using the Page Feature
The Page feature sends a signal from the Base Unit to the Handset
causing it to beep. This is useful for locating the Handset when it is
away from the Base Unit.
1. Press
page/find
on the Base Unit.
2. The Handset beeps several times.
Note:
The paging feature does not work when the phone is in use.
Adjusting Ringer/Volume Controls
Ringer Tone and Volume
1. While the phone is not in use, press
G
.
2. The phone has two ringer tones, each with two volume levels.
Press
G
again until you select the ringer tone and volume you
want.
Setting the Receiver Volume
1. While you are on a call, press
V
.
2. The phone has two receiver volume levels, one soft and one
loud. Press
V
again until you select the receiver volume you
want.
19
