Uniden EXP 3240 Series, Руководство пользователя

Страница: 7 / 12

6
Page
To locate the handset (while it’s off the base), press find handset on the base. The handset beeps
for 60 seconds.
Paging is canceled when pressing any key, find handset on the base or return the handset
to the base.
Flash and Call Waiting
If you have “Call waiting” service and a call waiting tone sounds
while you are on a call, press
flash to accept the waiting call. There
is a short pause, then you will hear the new caller. To return to the
original caller, press
flash again.
NOTE : You must subscribe through your local telephone company to
receive Call Waiting Service.
Storing a Phone Number in Memory
Your cordless phone has 1 RocketDial memory location and 10 additional memory locations
for storing important telephone numbers. You can store your most frequent dialed number in
the one-touch RocketDial location.
1) Remove the handset from the base.
2) Press
mem . The talk/batt low LED flashes.
3) Enter the phone number, up to 20 digits. If a pause is needed
during the dialing sequence, press
redial/p
to insert a pause.
Each pause counts as a digit and represents a two second delay
in time between digits as they are sent.
4) Press mem again.
To actually store a number in it’s designated location;
5) Press RocketDial .
or
5) Press memory location (
0 - 9 ) on the keypad to store a number.
A tone indicates that the number is stored. If you enter a number in a location that has a
previously stored number it will overwrite the existing number without warning.
NOTES : • The pause button counts as one digit. Pressing redial/p more than once
increases the length of pause between numbers.
• You have 30 seconds after pressing mem to enter the number you wish to store.
Otherwise, the handset will beep rapidly.
• Memory location for the RocketDial is independent from the memory location for
Memory Dial.
Dialing a Stored Number
Using the memory location features
1) Press talk , then press mem .
2) Enter the memory location ( 0 - 9 ) on the keypad. The stored number automatically dials.
NOTE : If you select a memory location that does not have a stored number, the handset
will beep rapidly and the phone will not dial.
EXP3240_UP001BH UP001BA_1 1/7/3 5:29 PM Page 6