Uniden EXI976, Руководство пользователя

Страница: 15 / 52

G E T T I N G S T A R T E D [ 15 ] www.uniden.com
1) When the phone is in standby mode, press and hold the
caller id/menu key. The Caller ID setting screen appears.
2) Press the vol/ / key twice to select Area Code .
3) Press the select key.
4) Use the number ( 0 - 9 ) or delete/channel key to enter the
3-digit area code.
5) Press the select key. A confirmation tone sounds and the displayed area code is
entered.
6) Press the end key or return the handset to the base unit to complete the setting.
The handset returns to standby mode.
When the area code has already been stored in memory, the stored
area code will be displayed. To change it, use the
delete/channel
key and number keys to enter the new area code.
Then press the
select key. A confirmation tone sounds. To
complete the setting, press the end key or return the handset to
the base unit.
GETTING ST
ARTED
Choosing the dialing mode
Most phone systems use tone dialing which sends DTMF tones through the phone
lines. However, some phone systems (such as those in rural areas) still use pulse
dialing. The default setting is tone dialing. Depending on your dialing system, set
the mode as follows:
Make sure your battery
pack is fully charged
before choosing the
dialing mode.
UC425BH (EXI976) 9/19/03 5:19 PM Page 15