Uniden EXI960, Руководство пользователя

Страница: 26 / 47

5. The Status LED on the Base Unit will
blink to indicate that the Digital
Security Code is set to one of the more
than 65,000 codes.
❉
If the Base Unit loses power while the Handset is off the Base, the
Digital Code may be erased. When this happens, the Handset will not
function.
To reestablish communication between the Handset and Base Unit:
1. Restore power to the Base Unit.
2. Place the Handset back on the Base Unit.
3. The Status LED on the Base Unit will blink to indicate that the Digital
Security Code is set.
Entering the Local Area Code
❉
Please refer to the foldout in front of your operating guide for key
positions.
❉
If you do noit press a key within 5 seconds, the Handset beeps and the
phone returns to standby.
You must enter your local area code for the Caller ID redial features to work
properly.
To enter your local area code:
1. Remove the Handset from the Base Unit.
2. Press
function
twice.
3. Enter your local area code. For
example,
817
.
function
rdl/pause
vol/can
chan/del
0
oper
#
status
page/find
AREA CODE
1-
AREA CODE
1-817
26