manualshive.com logo in svg

Uniden EXI2970 Series, Руководство пользователя

Поделиться
Скачать
Uniden EXI2970 Series Скачать руководство пользователя страница 9

G E T T I N G   S TA R T E D

[ 7 ]

GETTING ST

ARTED

Charge the battery pack for at least 15-20 hours
before plugging the phone line into your phone.

1) Press in on the battery cover release and slide the cover

down until it comes off.

2) Connect the battery pack connector observing correct

polarity (black and red wires) to the jack inside the
battery compartment. 

Do not exert any force on this connection. It could cause

damage to the battery or to the handset. The plastic
connectors will fit together in only one way. 
Once you are certain that you have made a good
connection, then insert the battery pack into the battery
compartment. Do not pinch the wires.

3) Securely close the battery compartment cover by sliding

it up until it snaps into place.

4) Place the handset on the base. Remove the beltclip, if

attached, for face up charging.

B. Install the battery pack

Use only the Uniden
battery (BT-905)
supplied with your
phone. Replacement
batteries are also
available through the
Uniden Parts Department.
(See page 5.)

EXI2970 ENG-0719  7/18/01  19:50  Page 7

Содержание EXI2970 Series

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды