Uniden EXI2926, Руководство пользователя

Страница: 23 / 60

B A S I C S [ 21 ]
BASICS
•The tone feature only
applies when the dial
mode is set to pulse.
•This special number
can be stored in a
memory location. This
is referred to as Chain
Dialing.
note
Redial
The redial/p key redials the last number dialed. The redialed number can be up to
32 digits long.
H Haan nd dsseett
Press line 1 or line 2 , then press redial/p .
Or press redial/p , then press line 1 or line 2 .
B Baassee
Press line 1 or line 2 , then press redial/p .
If any key is pressed before, the last number will not redial.
Tone Dialing Switch-over
Some telephone companies use equipment that requires
pulse dialing (sometimes referred to as rotar y dialing).
If you need to enter tone dialing digits, you can switch-over to tone dialing during
the call. For example, entering your bank account number af ter you have called
your bank.
Initially make your call with the pulse dialing mode. Once your call connects, press
*
/
t
/tone . Enter the desired number. These digits will be sent as tone dialing.
Once the call ends, the tone mode is canceled and pulse dialing mode resumes.
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your base unit,
noise increases. If you pass the range limits of the base unit, your call will
terminate within 5 minutes.
The EXI2926 has two
independent last number
redial memories; one in
the handset, the other
in the base.
tip
EXI2926-ENG/03/07 3/7/02 1:47 PM Page 21