background image

A D D I T I O N A L   I N F O R M A T I O N

[ 62 ]

www.uniden.com

Precautions!

Before you read anything else, please observe the following:

Warning!

Uniden America Corporation DOES NOT represent this unit to be
waterproof. To reduce the risk of fire, electrical shock, or damage 
to the unit, DO NOT expose this unit to rain or moisture. 

Rechargeable Nickel-Cadmium Battery Warning

• This equipment contains a rechargeable nickel-cadmium battery.
• Cadmium is a chemical known to the State of California to cause

cancer.

• The rechargeable nickel-cadmium battery contained in this

equipment may explode if disposed of in a fire.

Do not

short-circuit the battery.

• Do not charge the rechargeable nickel-cadmium battery used in this

equipment in any charger other than the one designed to charge
this battery as specified in the owner’s manual. Using another
charger may damage the battery or cause the battery to explode.

Rechargeable Nickel-Cadmium
Batteries Must Be Recycled or
Disposed of Properly

• Uniden voluntarily participates in an RBRC® industry program to

collect and recycle nickel-cadmium batteries at the end of their
useful life, when taken out of service within the United States. 
The RBRC® program provides a convenient alternative to placing
used nickel-cadmium batteries into the trash or municipal waste
stream, which is illegal in some areas.

• Through the RBRC® program, Uniden makes it easy for you to drop

off the used battery at local retailers of replacement nickel-cadmium
batteries. You may also contact your local recycling center for
information on where to return the used battery. Please call 1-800-
8-BATTERY for information on Ni-Cd battery recycling in your area.
Uniden's involvement in this program is part of its commitment to
protecting our environment and conserving natural resources.

• RBRC® is a registered trademark of the Rechargeable Battery

Recycling Corporation.

Uniden works to reduce lead content in our PVC coated cords in our
product and accessories.

Warning!

The cords on this products and/or accessories contain lead, a chemical

known to the State of California to cause birth defects or other 
reproductive harm. 

Wash hands after handling.

Important Safety Instructions

When using your telephone equipment, these basic safety precautions
should always be followed to reduce the risk of fire, electrical shock,
and injury to persons:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Use a dry

cloth for cleaning without liquid or aerosol cleaners.

4. Do not use this product near water; for example, near a bathtub,

wash bowl, kitchen sink or laundry tub, in a wet basement, or near a
swimming pool.

5. Do not place this product on an unstable cart, stand, or table. 

The telephone may fall, causing serious damage to the unit.

6. Slots and openings in the cabinet and the back or bottom are

provided for ventilation. To protect the product from overheating,
these openings must not be blocked or covered. This product should
never be placed near or over a radiator or heat register. This product
should not be placed in a built-in installation unless proper
ventilation is provided.

7. This product should be operated only from the type of power source

indicated on the marking label. If you are not sure of the type of
power supply to your home, consult your dealer or local power
company.

8. Do not allow anything to rest on the power cord. Do not locate this

product where the cord will be damaged by persons walking on it.

9. Do not overload wall outlets and extension cords, as this can result

in the risk of fire or electrical shock.

10. Never push objects of any kind into this product through cabinet

slots, as they may touch dangerous voltage points or short out parts
that could result in a risk of fire or electric shock. Never spill liquid
of any kind on the product.

11. To reduce the risk of electric shock, do not disassemble this product.

Take it to qualified service personnel when service or repair work is
required. Opening or removing covers may expose you to dangerous
voltages or other risks. Incorrect reassembly can cause electric shock
when the appliance is subsequently used.

12. Unplug this product from the wall outlet and refer servicing to

qualified service personnel under the following conditions:

A. When the power supply cord is damaged or frayed.
B. If liquid has been spilled into the product.
C.

If the product has been exposed to rain or water.

D. If the product does not operate normally when following the

operating instructions. (Adjust only those controls that are
covered by the operating instructions. Improper adjustment
of other controls may result in damage and will often require
extensive repair work by a qualified technician.)

E.

If the product has been dropped or the cabinet has been
damaged.

F.

If the product exhibits a distinct change in performance.

13. Do not use the telephone to report a gas leak in the vicinity of the

leak.

Additional Battery Safety Precautions

Caution!

To reduce the risk of fire or injury to persons by the
battery, read and follow these instructions:

1. Use only the Uniden battery pack specified in the owner’s manual. 
2. Do not dispose of the battery pack in a fire. The cell may explode.

Check the nickel-cadmium battery disposal package insert for
disposal instructions.

3. Do not open or mutilate the battery pack. Released electrolyte is

corrosive and may cause damage to the eyes or skin. It may be toxic
if swallowed.

4. Exercise care in handling the battery in order not to short the

battery with conducting materials such as rings, bracelets, and keys.
The battery or conductor may overheat and cause burns.

5. Charge the battery pack provided with or identified for use with this

product only in accordance with the instructions and limitations
specified in the owner’s manual provided for this product.

6. Observe proper polarity orientation between the battery pack and

battery charger.

SAVE THESE INSTRUCTIONS!

Important Electrical Considerations

Unplug all electrical appliances when you know an electrical storm is
approaching. Lightning can pass through your household wiring and
damage any device connected to it. This phone is no exception.

The FCC Wants You To Know

Changes or modifications to this product not expressly approved by
Uniden, or operation of this product in any way other than as detailed
by the owner’s manual, could void your authority to operate this
product. Your telephone compiles with Part 68 of FCC Rules. You must,
upon request, provide the FCC registration number and the REN to your
telephone company. Both numbers are on the base unit.

NOTE:

You must not connect your phone to:
• coin-operated systems
• most electronic key telephone systems

This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful.
interference, and (2) This device must accept any interference received,
including interference that may cause undesired Operation. Privacy Of
Communications May Not Be Ensured When Using This Phone.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.

Содержание EXAI978 - EXAI 978 Cordless Phone









































































Отзывы: