Uniden EXAI7980 Скачать руководство пользователя страница 10

Страница: 10 / 56

Step 3

(continued)

Battery use time (per charge)

From fully charged
• Seven hours coutinuous use.
• Seven days when the handset is in the standby mode.

When the battery charge becomes low

When the voltage of battery pack is very low and
needs to be charged, the phone eliminates functions
to save power. If the phone is not in use,
“

Low Battery

” flashes and none of the keys

will operate. If the phone is in use, "

Low Battery

" flashes and the handset

beeps. Complete your conversation as quickly as possible and return the handset to
the base unit for charging.

Notes

• Even when the battery pack is not being used, it will gradually discharge over a long

period. For optimum performance, be sure to return the handset to the base unit after
a telephone call for charging the battery.

• The built-in memory backup holds numbers and names stored in the memory for up

to 2 minutes, while you replace the battery pack.

Cleaning the battery contacts

To maintain a good charge, it is important to clean all battery contacts on the handset
and base unit with a dry cloth or pencil eraser, if necessary, about once a month.

Do not use any liquids or solvents.

EXAI 7980 6th HEN 5/22/00 18:10 Page 10

Содержание EXAI7980

























































Результаты поиска

Содержание EXAI7980

Отзывы:

Похожие инструкции для EXAI7980

Бренды по названию

Популярные бренды

Uniden EXAI7980, Руководство пользователя

Результаты поиска

Содержание EXAI7980

Отзывы:

Похожие инструкции для EXAI7980

Бренды по названию

Популярные бренды