manualshive.com logo in svg

Uniden EXAI378, Руководство пользователя, Страница: 16 / 68

Поделиться
Скачать
Uniden EXAI378 Скачать руководство пользователя страница 16

Terminology

Throughout this manual, terms such as Standby and Talk Mode are used. Below is
the terminology explanation.

•

Standby Mode

- The handset is not in use, off the base, and 

talk/flash

has not

been pressed. A dial tone is not present.

•

Talk Mode

- The handset is off the base and 

talk/flash

has been pressed

enabling a dial tone.

[ 14 ]

G E T T I N G   S T A R T E D

Direct wall mounting

If you don't have a standard wall plate, you can mount your phone directly to the
wall. Before doing this, consider the following:

•

Avoid electrical cables, pipes, or other items behind the mounting location that
could cause a hazard when inserting screws into the wall.

•

Try to mount your phone within 5 feet of a working phone jack to avoid
excessive cord lengths.

•

Make sure the wall material is capable of supporting the weight of the base 
and handset.

•

Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices
suitable for the wall material where the base unit will be placed.

1) Insert two mounting screws into the wall, (with their

appropriate anchoring device), 3-15/16 inches apart. Allow
about 1/8 of an inch between the wall and screw heads for
mounting the phone.

2) Refer to steps 1 through 7 on page 13 to mount the telephone.

EXAI378  2/8/2 6:57 PM  Page 14

Содержание EXAI378





































































Отзывы:

Нет отзывов