Uniden EXAI2980i, Руководство пользователя, Страница: 12 / 64

If your telephone outlet isn’t modular,
contact your telephone company
for assistance.
[ 10 ] G E T T I N G S TA R T E D
D D.. CCh ho oo ossee tth hee d diiaall m mo od dee
Most phone systems use tone dialing which sends DTMF tones through the phone line.
However some phone systems still use pulse dialing such as in rural areas. The default
setting is tone dialing. Depending on your dialing system, set the mode as follows:
1) Press and hold ffllaassh h until you hear a conf irmation tone.
The current setting appears next to Dial Mode.
2) To set the dial mode for pulse dialing, press # .
Or to set the dial mode for tone dialing, press
*
/ tone . A conf irmation tone sounds to indicate the
setting is complete.
• If you are not sure of your dialing system, set for tone dialing. Make a trial call.
If the call connects, leave the setting as is, otherwise set for pulse dialing.
•If your phone system requires pulse dialing and you need to send DTMF tones for certain
situations during a call, you may "switch-over" to tone dialing. (Refer to "Tone Dialing
Switch-over" on page 17.)
Modular
Make sure your battery
pack is fully charged
before choosing the dial
mode.
5) Connect the telephone line cord to the
TTEELL LLIIN NEE
jack and a telephone outlet once the handset is
fully charged.
• Af ter installing the batter y pack in the handset, charge your handset at least
1 15 5--2 20 0 h ho ou urrss b beeffo orree p pllu ug gg giin ng g iin ntto o tth hee p ph ho on nee lliin nee. Once the handset batter y pack is
fully charged, connect the telephone line cord to the base and telephone
wall outlet.