B A S I C S E T U P
[ 14 ]
www.uniden.com
1) When the phone is in standby mode, press and hold the
call id/menu
key. The following screen appears.
2) Press the
▼
key twice to select
Area Code
.
3) Press the
select/remote
key. If an area code was already
stored, the phone will display it.
4) Use the number keys (
0
-
9
) to enter the 3-digit area code.
If you make an error, use the
delete/chan
key to backspace.
5) Press the
select/remote
key. A confirmation tone sounds.
6) Press the
end
key to complete the setting. The handset returns to standby mode.
Choosing the Dialing Mode
Your phone can communicate with the telephone network in two different ways: tone
dialing and pulse dialing. These days, most phone networks use a method called tone
dialing, so your phone comes programmed for tone dialing.
If your phone company uses pulse dialing, you'll need to change your phone's dial
mode. There's an easy way to tell: try making a call. If your call connects, your
phone's setting is fine. If not, follow the steps below:
Entering Your Area Code
If you can make a call by dialing only 7 digits (instead of 10), you can program your
local area code in your phone. If you get a call from within your area code, you'll
only see the 7-digit phone number. If you get a call from outside your area code,
you'll see all 10 digits.
