Step 2: Connect the Charger
Step 3: Register the Handset
1
2
3
4
Connect the AC adapter to
the
jack and to a
standard 240V AC wall outlet.
Set the charger on a desk or
tabletop, and place the
handset in the charger with
the LCD screen facing
forward.
Make sure the
LED
illuminates. If the LED does not
illuminate, check to see that the AC adapter is plugged in and that
the handset makes good contact with the charger charging contacts.
•
• Place the charger close to the AC outlet so that you can
unplug the AC adapter easily.
Charge the handset for 15 - 20 hours before using.
DC IN 9V
charge
Use only the supplied AAD-600S AC adapter. Do not use
any other AC adapter.
YOU NEED TO REGISTER THE ELITE8805 SERIES TO THE MAIN BASE
BEFORE USE!
For Backward Compatible Base Models - DSS7800 series [DSS7815,
1, DSS7855 and 1]
#
1
2
3
Disconnect the AC adapter from the main base.
While pressing down on the following key, reconnect the AC adaptor.
DSS7815/1 models -
key
DSS7855/1 models -
key
Keep pressing the key until the CHARGE LED starts to blink.
On the handset, press and hold the key until you hear a beep.
find handset
flash/find hs
(3)
