Uniden DXI4560-2 Скачать руководство пользователя страница 15

4

When.to.Re-register.Handsets

In some cases, it may be necessary to re-register your handsets. To re-register your handsets, please follow 
registration steps outlined on page 3.

Re-registration is required in the following scenarios:
)  You’ll need to re-register both handsets (follow steps on page 3) each time the digital security code is changed. 

(Refer to page 32 for details regarding the Digital Security Code.)

2)  When there is a power failure for more than one hour: If power failure occurs (e.g. due to electrical storm or if 

the unit is unplugged during a move), both handsets will need to be re-registered. To re-register, follow the same 
registration process on page 3.

3)  If any handset’s battery becomes very low, the handset must be recharged for 5 - 20 hours and re-registered to 

the main base unit.

4)  In any circumstance in which you experience difficulty connecting to the main base to place or receive calls, the 

handset should be re-registered.

Note:.Make.sure.to.return.the.handsets.to.the.cradles.after.each.phone.call.

Содержание DXI4560-2

















































Отзывы: