manualshive.com logo in svg

Uniden DXI386, Руководство пользователя

Поделиться
Скачать
Uniden DXI386 Скачать руководство пользователя страница 5

Q U I C K   R E F E R E N C E   G U I D E

[ 3 ]

Step 1  Charging the Batteries

TO INSTALL THE HANDSET BATTERIES

CONNECT TO A PHONE LINE

When the handset battery pack is fully charged,
after 15-20 hours of charging, plug the telephone
cord into the main base unit and then into a
telephone wall jack. 

Your phone is set for tone dialing. If your local
network requires pulse dialing, please see “Choose
the dialing mode” on page 17.

1

Remove the cover.

TO CHANGE CALLER ID OPTIONS

1

Press and hold 

cid/menu

.

2

Press 

or 

to move the pointer to an

option.

3

Press 

select/channel

to change the option

setting.

4

Press 

end

and return the handset to the

main base.

1

Plug AC adapter cord into the main base
unit and extra charging cradle and then
into a 120V AC outlet.

2

Place one handset in the main base and
place the other handset in the extra
charging cradle. 
It does not matter which handset is placed
in the main base and extra charging cradle.

2

Connect the battery 
pack connector with 
the correct polarity.

3

Replace the cover.

TO PLUG INTO AC POWER

Note:

You must charge the batteries continuously
for 15 - 20 hours before using the phone.

Note:

Three Caller ID options are available: AutoTalk,

Caller ID on Call Waiting (CIDCW), and Area Code. 

Note:

CIDCW can only be changed on HS1.

QUICK REFERENCE GUIDE

Step 2  Connecting

Step 4 Setting Up the Caller ID

Step 3 Before Using, Register Extra Handset to Base

1

After fully charging the handsets, remove
the handset from the extra charging cradle
and place it in the main base cradle. 
(Base LED light will begin to flash
indicating registration is occurring.)

2

Wait for at least 5 seconds before removing
the extra handset from the main base.

Congratulations, the registration has been
completed, and your dual handset cordless 
phone is ready for use!

DXI386  6/7/2 10:50 AM  Page 3

Содержание DXI386





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды