Uniden DXAI7288-2 Скачать руководство пользователя страница 61

A D D I T I O N A L   I N F O R M A T I O N   [ 6 0 ]

w w w . u n i d e n . c o m

Telephone Line Problems

The FCC has granted the telephone company the right to disconnect 
service in the event that your phone causes problems on the telephone 
line. Also, the telephone company may make changes in facilities and 
services which may affect the operation of your unit. However, your 
telephone company must give adequate notice in writing prior to such 
actions to allow you time for making necessary arrangements to continue 
uninterrupted service.
If you are having trouble with your telephone service, you must first 
disconnect your phone to determine if it is the cause of your problem. If 
you determine that it is the cause, you must leave it disconnected until 
the trouble has been corrected.

Radio Interference

Radio interference may occasionally cause buzzing and humming in your 
cordless handset, or clicking noises in the base. This interference is 
caused by external sources such as TV, refrigerator, vacuum cleaner, 
fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE. 
If these noises continue and are too distracting, please check around 
your home to see what appliances may be causing the problem. 
In addition, we recommend that the base not be plugged into a circuit 
that also powers a major appliance because of the potential for 
interference. Be certain that antenna on the unit is fully extended. 
In the unlikely event that you consistently hear other voices or 
distracting transmissions on your phone, you may be receiving radio 
signals from another cordless telephone or other source of interference. 
If you cannot eliminate this type of interference, you need to change to 
a different channel.
Finally, it should be noted that some cordless telephones operate at 
frequencies that may cause interference to nearby TVs and VCRs. 
To minimize or prevent such interference, the base of the cordless 
telephone should not be placed near or on top of a TV or VCR. 
If interference is experienced, moving the cordless telephone farther 
away from the TV or VCR will often reduce or eliminate the interference.

More than One Cordless Telephone

If you want to use more than one cordless telephone in your home, they 
must operate on different channels. Press the delete/channel key to 
select a channel that provides the clearest communication.

Cordless Telephone Privacy

Cordless telephones are radio devices. Communications between the 
handset and base of your cordless telephone are accomplished by means 
of radio waves which are broadcast over the open airways. Because of the 
inherent physical properties of radio waves, your communications can be 
received by radio receiving devices other than your own cordless 
telephone unit. Consequently, any communications using your cordless 
telephone may not be private.

Installation Considerations

Selecting a Location

Before choosing a location for your new phone, there are some important 
guidelines you should consider:
• The location should be close to both a phone jack and continuous 

power outlet. (A continuous power outlet is an AC outlet which does 
not have a switch to interrupt its power.)

• Keep the base and handset away from sources of electrical noise such 

as motors or fluorescent lighting.

• The base can be placed on a desk or tabletop or mounted on a standard 

telephone wall plate.

• You should charge your new phone for 15-20 hours before completing 

the installation or using the handset.

Telephone Line Outlets

There are two types of phone outlets:

Modular Jack

Most phone equipment available now uses modular jacks. Phone cords are 
fitted with a molded plastic connector which plugs into this type of jack. 
If you do not have modular phone jacks, contact your local telephone 
company for information about their installation.

Hardwired Jack

Some equipment is wired directly to a phone jack, and these types of 
installations require a modular jack converter. This type of installation is 
not difficult; however, you should contact your Uniden telephone dealer 
or a telephone supply store for advice about the proper adapter or 
converter for your particular situation.

Connecting the Telephone Cords

Consider these safety guidelines before connecting the telephone cords:

Caution!

• Never install telephone wiring during a lightning storm.
• Never touch uninsulated telephone wires or terminals unless the 

telephone line has been disconnected.

• Use caution when installing or modifying telephone lines.

Applying Power to the Base

This phone requires an AC outlet, without a switch to interrupt power, 
and the included AC adapter. To relieve strain on the DC plug when the 
phone is placed on a desk or table, wrap the power cord around the strain 
relief notch on the back of the base.

NOTE:

Place the power cord so that it does not create a trip hazard, or 
where it could become chafed and create a fire or other 
electrical hazards.

One Year Limited Warranty

Important:

 Evidence of original purchase is required for warranty service.

WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”)
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original 
retail owner, this Uniden Product to be free from defects in materials and 
craftsmanship with only the limitations or exclusions set out below.

WARRANTY DURATION: This warranty to the original user shall terminate 
and be of no further effect 12 months after the date of original retail 
sale. The warranty is invalid if the Product is (A) 
damaged or not maintained as reasonable or necessary, (B) modified, 
altered, or used as part of any conversion kits, subassemblies, or any 
configurations not sold by Uniden, (C) improperly installed, 
(D) serviced or repaired by someone other than an authorized Uniden 
service center for a defect or malfunction covered by this warranty, (E) 
used in any conjunction with equipment or parts or as part of any system 
not manufactured by Uniden, or (F) installed or programmed by anyone 
other than as detailed by the owner’s manual for this product.

STATEMENT OF REMEDY: In the event that the product does not conform 
to this warranty at any time while this warranty is in effect, warrantor 
will either, at its option, repair or replace the defective unit and return it 
to you without charge for parts, service, or any other cost (except 
shipping and handling) incurred by warrantor or its representatives in 
connection with the performance of this warranty. Warrantor, at its 
option, may replace the unit with a new or refurbished unit. THE LIMITED 
WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY 
PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL 
OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, 
IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT 
LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS 
FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR 
PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR 
CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or 
limitation of incidental or consequential damages so the above limitation 
or exclusion may not apply to you.

LEGAL REMEDIES: This warranty gives you specific legal rights, and you 
may also have other rights which vary from state to state. This warranty 
is void outside the United States of America and Canada.

PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after 
following the instructions in the owner’s manual you are certain that the 
Product is defective, pack the Product carefully (preferably in its original 
packaging). The Product should include all parts and accessories 
originally packaged with the Product. Include evidence of original 
purchase and a note describing the defect that has caused you to return 
it. The Product should be shipped freight prepaid, by traceable means, to 
warrantor at: 

Uniden America Corporation

Parts and Service Division
4700 Amon Carter Blvd. Fort Worth, TX 76155

(800) 297-1023, 8 a.m. to 5 p.m. CST, Monday through Friday
or visit our website at 

www.uniden.com

AD

DITIONAL

 

IN

FORM

A

T

IO

N

UP038.book  60 ページ  2004年1月26日 月曜日 午前10時17分

Содержание DXAI7288-2





































































Отзывы: