Uniden DXAI5588-3 Series Скачать руководство пользователя страница 55

Страница: 55 / 64

TROUBLESHOO

TING

T R O U B L E S H O O T I N G

[ 55 ]

www.uniden.com

Symptom

The handset doesn’t
communicate with the main
base or the other handset.

No 3- way conversation.

The answering system does not
work.

The answering system does not
record any messages.

Messages are incomplete.

After a power failure, the
outgoing message is deleted.

No sound on the main base
speaker during call monitoring
or message playback.

Cannot access remote call-in
features from another
touch-tone phone.

Suggestion

•

Re-register all handsets (see page 13).

•

Only one handset at a time can talk with an outside caller. To allow the other hand-
set to talk to the caller, transfer the call.

•

Make sure the AC adapter is plugged into wall outlet.

•

Make sure the answering system is turned on.

•

Set the record time to either the one minute or four minute option.

•

The memory may be full. Delete some or all of the saved messages.

•

The incoming messages may be too long. Remind callers to leave a brief message.

•

The memory may be full. Delete some or all of the saved messages.

•

Record your personal outgoing message again. The default message should remain.

•

Adjust the speaker volume on the main base.

•

Make sure you're using the correct PIN code.

•

Make sure that the touch-tone phone you're using can transmit the tone for at least
two seconds. If it cannot, you may have to use another phone to access your
messages.

Содержание DXAI5588-3 Series

































































Результаты поиска

Содержание DXAI5588-3 Series

Отзывы:

Похожие инструкции для DXAI5588-3 Series

Бренды по названию

Популярные бренды

Uniden DXAI5588-3 Series, Руководство пользователя

Результаты поиска

Содержание DXAI5588-3 Series

Отзывы:

Похожие инструкции для DXAI5588-3 Series

Бренды по названию

Популярные бренды