Uniden DXAI 7288-2 Series Скачать руководство пользователя страница 48

[ 4 7 ]   T H E   I N T E G R A T E D   A N S W E R I N G   D E V I C E

w w w . u n i d e n . c o m

Voice Memo

The voice memo function allows you to record messages as 
shorts as two seconds and as long as four minutes.

1) With the phone in standby mode, press and hold the 

memo rec

 key.

You hear an announcement “Record memo message” 
and a tone. [

] flashes on the message counter.

2) Start your recording.

3) When you have finished, press the 

 (play/stop), 

memo rec

 or 

set

 key to stop recording. You hear a 

confirmation tone, and the system returns to standby.

Recording a Conversation

You can record up to 10 minutes of conversation while you are using your phone. Any 
conversation that lasts less than two seconds will not be recorded.

1) During a conversation from the handset, press and hold the 

memo rec

 key. 

The unit begins recording with a confirmation tone and [

] flashes on the 

message counter. 

A beep that can be heard by both parties sounds during recording.

If you receive a call waiting tone while recording a conversation, press the 

talk/flash

 

key to accept the waiting call. The recording feature continues recording the new call. 
The original call is put on hold.

2) To stop recording, press the 

 (play/stop) or 

memo rec

 key.

You hear a confirmation tone.

•The voice memo 

recorded is completely 
independent of the 
greeting message.

•The voice memo 

messages are recorded 
as incoming messages.

•When the answering 

system is full, [

appears on the 
message counter, and 
recording is 
terminated.

•A recorded 

conversation is treated 
as a incoming message 
and will be added to 
the stored messages.

•When recording a 

conversation, all 
dialing features except 
for using call waiting 
(see page 21) are 
disabled. 
Stop recording if you 
need to enable any 
other handset keys.

note

THE INT

E

GR

A

T

ED

 

ANS

WE

RING DEV

I

C

E

UP038.book  47 ページ  2004年1月26日 月曜日 午前10時17分

Содержание DXAI 7288-2 Series





































































Отзывы: