Uniden DSS7955 Series, Руководство пользователя

Страница: 49 / 84

48
Note:
Warning! The Room monitor function is not a replacement for regularly checking the safety and security of
children. The operating time is limited to the remaining charge of the battery and is not suitable for continuous
overnight use.
This telephone system is not intended to replace an AC powered room monitoring system. The length of time
that a handset can monitor a room is limited to the talk time remaining on the handset battery (5 hours or
less). For more information, see “Talk and Standby Times” on page 67.
This feature only works when both handsets are within range of the base.
If the party is out of range, UNAVAILABLE appears in the display and the operation will be canceled.
While a pair of handsets is in Room Monitoring mode, only the Handsets in monitoring mode can receive
incoming calls. To resume normal telephone operation, you should terminate the monitoring session by
pressing the END soft key on either handset.
Tone.Dialing.Switch.Over
If your telephone company requires pulse dialing, you can switch to tone dialing after the call connects. This feature
is useful when you need tone dialing to use automated menu systems, such as telephone bank tellers, telephone
prescription refills, customer support menus, etc. If your phone is set to pulse dialing, make your call normally. Once
your call connects, press [
tone
/<] on the handset. Any digits you enter from then on will be sent as tone dialing. When
this call ends, the phone automatically returns to pulse dialing.
•
•
•
•
•