The
pause button counts
as one digit. Pressing
redial/p
on the handset,
more than once increases
the length of pause
between numbers.
Accidentally pressing
memory keys a, b, c or d
may result in
unintentional dialing.
Press the v o l
▲
or key on the handset to increase or decrease
On certain occasions after dialing a number, you may be requested to
volume while on a call. Volume will remain on the same setting when
enter an access code, such as your account number. You can enter this
you hang up.
number into a memory location for later use by doing the following.
Lift the handset from the base.
Press mem. The talk/batt low LED blinks.
Enter the phone number, up to
16
digits. If a pause is needed
during dialing to access a long distance service, press redial/p
Press mem again.
Enter the memory location (01-20) on the keypad or press
memory key
a, b, c
or d A tone indicates that the number is stored.
Using
the memory location features
1) Press talk
2) Press mem.
3) Enter the memory location (01-20) on the
keypad. The number automatically dials.
One-touch memory dialing
Press a one-touch memory key
a, b, c
or
d. The
number
automatically dials.
erase procedure will be
cancelled if more than 30
seconds elapse behveen
each keystroke.
1) Store the access code into one of the memory locations
(01-20) or press memory key
a, b, c
or d following steps 1-5
above.
2) Dial the party or service main number.
3) When you need to enter the special number, press mem followed by
the memory location (01-20) or press memory key
a, b,
c
or
d
To use the mute feature during a conversation, press mute The other
party will not be able to hear you although you can hear them. To
disable the mute feature, press mute again.
As you begin to move too far from your base unit, you will first hear a
clicking sound. As you travel further out-of-range, the voice
transmission will begin to break up. If you pass the range limits of the
base unit, your call will terminate.
1) Remove the handset from the base unit.
2) Press the mem button twice.
3) Press the memory location (01-20) or
press memory key
a, b, c,
or
d
to be
erased. A tone indicates that the stored
number is erased from memory.
23
22
