background image

isn't practical, the telephone company will notify the customer as soon as possible. Also, you 
will be advised of your right to  le a complaint with the FCC if you believe it is necessary. The 
telephone company may make changes in its facilities, equipment, operations or procedures 
that could affect the operation of the equipment. If this happens the telephone company 
will provide advance notice in order for you to make necessary modi cations to maintain 
uninterrupted service.

Please follow instructions for repairing, if any (e.g. battery replacement section); otherwise do 
not substitute or repair any parts of the device except as speci ed in this manual. Connection 
to party line service is subject to state tariffs. Contact the state public utility commission, public 
service commission or corporation commission for information. This equipment is hearing aid 
compatible.

If you experience trouble with this equipment, contact the manufacturer (see the cover of this 
manual for contact information) or an authorized agent. If the equipment is causing harm to the 
telephone network, the telephone company may request that you disconnect the equipment 
until the problem is resolved. 

If your home has wired alarm equipment connected to a phone line, be sure that installing the 
system does not disable your alarm equipment. If you have questions about what will disable 
alarm equipment, contact your telephone company or a quali ed installer.

Any changes or modi cations to this product not expressly approved by the manufacturer or 
other party responsible for compliance could void your authority to operate this product.

NOTICE: According to telephone company reports, AC electrical surges, typically resulting 
from lightning strikes, are very destructive to telephone equipment connected to AC power 
sources. To minimize damage from these types of surges, a surge arrestor is recommended.

FCC Part 15 information

This device complies with part 15 of the FCC rules. Operation is subject to the following two 
conditions: (1) This device may not cause harmful interference, & (2) This device must accept 
any interference received, including interference that may cause undesired operation. Privacy 
of communications may not be ensured when using this phone. 

FCC PART 15.105(b)

 Note: This equipment has been tested & found to comply with the limits for a Class B digital 
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. This equipment generates, 
uses & can radiate radio frequency energy and, if not installed & used in accordance with the 
instructions, may cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning 
the equipment off & on, the user is encouraged to try to correct the interference by one or 
more of the following measures:

 



Reorient or relocate the receiving antenna.

 



Increase the separation between the equipment and receiver. 

 



Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected.

 



Consult the dealer or an experienced radio/TV technician for help.

Содержание DECT4066

















































Отзывы: