Using your phone
Make a call
1 Press
the
symbol is displayed. When
you hear the dial tone, dial the number you
want. The number is shown in the display.
After a short delay the call timer will start timing
the call.
2 Press
to exit and return to standby.
Adjust the earpiece/speaker volume during a
call
1 Press
or
to adjust the volume.
There are six levels.
Make a call by pre-dialing
1 In standby, enter the number to be dialed.
The number is displayed.
You can enter numbers up to 24 digits long.
Press
to delete any incorrect digits.
Press and hold
to delete all digits.
2 Press
to dial the displayed number.
Handset range
If the handset is too far away from the base,
during standby,
Searching
appears and the
symbol will flash. During a call you will hear a
warning tone. You will need to mover closer to the
base for clearer reception and to avoid being
disconnected.
Call timer
When you make or receive a call, a short while
after the line is connected the call timer will show
the duration of the call in the display in hours,
minutes and seconds. The call time will remain in
the display for approximately 5 seconds after you
end the call.
Handsfree speakerphone
You can use your cordless handset speakerphone
for handsfree conversations. To activate:
During a call:
1 Press
. The
symbol is displayed while
handsfree.
2 Press
or
again to go back to the
normal talk operation.
[2]
