23
Handset
Base
1. Remove the battery cover and disconnect
the battery.
1. Disconnect the AC
adapter to cut off
the power.
2. Let dry for at least 3 days with the battery
disconnected and the cover off for
ventilation.
2. Disconnect the
telephone cord.
3. After the handset dries, reconnect the
battery and replace the cover. Recharge the
battery fully (15-20 hours) before using.
3. Let dry for at least
3 days before
reconnecting.
CAUTION! DO NOT use a microwave oven to speed up the
drying process. This will cause permanent damage to the
handset, base and the microwave oven.
AC Adapter and Battery Information
•
Use only the supplied AC adapters. Be sure to use the proper adapter for the
base & any chargers.
•
Do not place the power
cord where it creates a trip
hazard or where it could
become chafed and create a
fire or electrical hazard.
•
Do not place the unit in
direct sunlight or subject it
to high temperatures.
•
Fully charged, the battery
should provide about 7 hours of talk time and about 6 days of standby time.
For best results, return the handset to the cradle after each call to keep it
fully charged.
•
When the battery gets too low, the handset shows a low battery alert. If you
hear a strange beep during a call, check the display: if you see the low battery
alert, finish your conversation as quickly as possible and return the handset
to the cradle. If the handset is in standby, none of the keys will operate.
•
With normal use, the battery should last about one year. Replace the battery
when the talk time becomes short even when the battery is charged. To buy a
replacement battery, visit our website listed on the front cover.
AC
adapter
Base/Charger
Part number
AAD-041S(M) /
AAD-600S(M)
Input voltage
240V AC, 50 Hz
Output voltage 9V DC @350mA /
9V DC @210mA
Battery
pack
Part number
BT-694m
Capacity
300mAh, 2.4V DC
