19
Voice Message Notification
If you subscribe to a voice mail service, your phone displays the voice
mail icon (
) when you have a new message. This feature supports
Frequency-Shift Keying (FSK) notification.
When you have new messages, the voice message icon appears in the
display, and the Status light on the handset blinks.
After you listen to all your messages, the message icon turns off and
the Status light on the handset stops blinking. If it doesn’t, you can reset
it: With the phone in standby, open the menu and select
Global Setup
;
select
VMWI Reset
, then select
Yes.
Resetting the Voice Message Indicator
If the voice message icon remains after you check your messages, you
can reset it.
1. With the phone in standby, open the menu.
2. Select the
Global Setup
, then select the
VMWI Reset
.
3. Select
Yes
.
When you sign up for a voice mail service, your service provider should
give you an access number. If you don’t have this information, contact
your provider before you start.
1. With the phone in standby, open the menu.
2. Select
Global Setup
, then select
Edit Voice Mail
. For the New Zealand
model the Telecom access number (083210) is preprogrammed.
3. Enter your access number exactly as you would dial it. You can enter
a total of 20 digits. If you need the phone to wait for a few seconds
between digits (to wait for the service to answer, for example), press
REDIAL/PAUSE
to insert a 2-second pause. If two seconds isn’t long
enough, you can insert as many pauses as you need, but each pause
counts as one digit. Press
MENU/SELECT
when you’re finished.
Setting up Your Voice Mail
Getting Your Messages
Press
MESSAGES/MUTE
and then
MENU/SELECT
to dial the access
number you programmed into this handset.
